Is it possible for a newly constructed home to have mold problems?

Answer: In some cases
Explanation: If moisture and ventilation concerns are not addressed

Answer: In some cases
Explanation: Mold can get anywhere on anything that has moisture.

Answer: In some cases
Explanation: I will photograph and document any mold

Answer: In some cases
Explanation: This depends on the builder and if there were issues getting the structure dried in before the interior got wet from outside forces.

Answer: In some cases
Explanation: Moisture draws molds. If there is some type of moisture you will find molds.

Answer: In some cases
Explanation: Depending on craftsman ship.

Answer: In some cases
Explanation: Wet materal during building

Answer: Always
Explanation: Structure age has no impact on mold growth. The underlying factor is always the amount of moisture.

Answer: In some cases
Explanation: Sure. Mold growth occurs whenever moisture is present and the surface can support it.

Answer: In some cases
Explanation: I have found mold in several newer houses. Some were not even finished yet and the builder had intentions of covering the mold with drywall. Mostly because they did not realize the discoloration was mold. I don't think it is common practice just to cover it up I think it is more ignorance of what mold can look like and how to spot and identify it.

Answer: In some cases
Explanation: If building materials are exposed to moisture prior to installation, this moisture can cause mold problems inside the walls and attic.

Answer: In some cases
Explanation: If building materials are exposed to moisture prior to installation, this moisture can cause mold problems inside the walls and attic.

Answer: In some cases
Explanation: Newly constructed homes can have many different issues. If the roof was not installed correctly or there was any water intrusion there can be mold.

Answer: In some cases
Explanation: Yes it is possible for several reasons one being defective drywall

Answer: In some cases
Explanation: Depending on the conditions of the construction site it could be very possible.

Answer: In some cases
Explanation: Yes that is possible in the case of improperly installed plumbing or roof components for instance.

Answer: In some cases
Explanation: In cases where the contractor was negligent and allowed the home to get wet and didn't take steps to dry it.

Answer: In some cases
Explanation: It could happen

Answer: In some cases
Explanation: plumbing, drainage, etc., any where moisture is detected can cause mold

Answer: In some cases
Explanation: Mold can be present on material during constrction.

Answer: In some cases
Explanation: If there is water intrusion to the home then there is a possibility of mold contamination.

Answer: In some cases
Explanation: Mold requires moisture and a food source. Building material can be exposed to the elements during the construction phase in the form of rain, snow, high humidity, etc. If building material is exposed to elevated moisture content, the possibility for mold growth exists.

Answer: In some cases
Explanation: Materials may have gotten damp or wet before or during construction.

Answer: Always
Explanation: Just because it is new is not a gaurantee from issues. If the home has has major water intrusion during the construction it can create conditions favorable for mold growth. A great way to ensure your new home is constructed properly is to hire a private inspector to perform construction phase inspections.

Answer: Always
Explanation: Any home can have a mold problem even new homes

Answer: Always
Explanation: Mold can be a problem anywhere moisture can set in. Water intrusions in any home regardless of age can contribute to mold issues.

Answer: In some cases
Explanation: If there is a water leak or high humidity issue, then newly constructed homes, just like all homes, can have mold problems.

Answer: In some cases
Explanation: Yes it is possible. Using mold resistant materials in your construction process will help eliminate mold infestation.

Answer: Always
Explanation: It's always possible. Mold is ubiquitous. It's found in Normal Ecology. When you bring building materials (paper and wood) indoors made from products from the outdoors (trees), ad a bit of moisture or humidity and fungal colonies will begin to grow both indoors and outdoors. During Lab Sampling of Air Quality a professional Mold Assessor who can also read an analysis report to write a treatment plan, will always collect an outdoor sample of air to identify "Normal Fungal Ecology" to which all other samples collected that day can be compared to for determining an indoor environmental snap shot and conditions.

Answer: Always
Explanation: Any excess moisture can create mold New construction is often over looked

Answer: In some cases
Explanation: Yes it is very possible if it gets wet during construction.

Answer: Always
Explanation: New doesn't mean anything.

Answer: In some cases
Explanation: It can happen

Answer: In some cases
Explanation: Yes. If the house has had moisture or water that has been allowed to sit, there could be mold.

Answer: In some cases
Explanation: There are mutilple factors that can contribute to mold problems. Poor construction, bad caulking, high uncontrolled water table, just to name a few.

Answer: In some cases
Explanation: During construction if the building has openings that are not protected by the weather it is possible for mold to grow in damp areas.

Answer: In some cases
Explanation: Materials used could be expose to bad conditions prior delivery to the work side

Answer: In some cases
Explanation: If moister gets to it will grow mold

Answer: In some cases
Explanation: If there was a water intrusion, or heavy rain, yes it can

Answer: In some cases
Explanation: If proper construction practices are not followed mold can be a problem.

Answer: In some cases
Explanation: I've inspected new construction and found that builders sometimes use support joists that are covered with mold.

Answer: In some cases
Explanation: Yes, if shotty work was done and if there are any leaks, faulty plumbing or poor construction.

Answer: In some cases
Explanation: It matters on where the home was constructed and how it was covered during the wet season.

Answer: In most cases
Explanation: It depends on outside weather variables, moister levels inside house. all contribute to an mold friendly environment

Answer: Always
Explanation: Mold is a direct byproduct of water. Anything that is or has been wet can support mold growth.